REMOVING AND REINSTALLING THE MAIN PARTS
CD MECHANISM SECTION
Perform steps 1, 2, 3,15,16,17 and 19 of the disassembly method to remove the CD mechanism.
Loading / Up / Down Motor
How to remove the loading motor (See Fig. 12-1)
1. Remove the screws (A1) x 2 pcs., to remove the loading motor.
Motor PWB
( A1 ) x2 ø2.6 x5mm
Figure 12-1
How to remove the pickup (See Fig. 12-2)
1. Remove the screws (B1) x 2 pcs., to remove the shaft (B2). 2. Remove the stop washer (B3) x 1 pc., to remove the gear (B4). 3. Remove the pickup.
Stop Washer ( B1 ) x2 ( B3 ) x1 ø2.6 x6mm Pickup
Note After removing the connector for the optical pickup fromthe connector wrap the conductive aluminium foil around the front end of connector so as to protect the optical pickup from electrostatic damage.
