|
No hay comentarios de productos.
Level 1 and 2 Service Manual
Disassembly
Removing and Replacing the Keypad
1. 2. Remove battery cover, battery, SIM, and rear housing, and endo assembly as described in the procedures. Using the tweezers, lift the keypad assembly out of the front housing with caution (see Figure 8).
Keypad
Keypad Guide
040975o
Figure 8. Removing the Keypad 3. Carefully set the keypad onto the front housing. Ensure the keypad is fully seated in the front housing and fit over the keypad guides molded into the front housing. Replace the endo assembly, rear housing assembly, SIM, battery, and battery cover as described in the procedures.
4.
6809490A76-O
October 29, 2004
27
|
