Other C330 series phone housings appear differently. The endo housing removal procedure is essentially the same for each type of housing.
1. 2.
3.
Remove the rear housing cover, and SIM as described in the procedures. Insert the plastic disassembly tool between the front housing and the endo housing to release the endo housing catches along the sides of the front housing as shown in Figure 8. Lift the endo housing out of the front housing.
DISASSEMBLY TOOL
ENDO HOUSING
FRONT HOUSING
ENDO HOUSING
FRONT HOUSING
021027
021027o
Figure 8. Removing the Endo Housing 4. 5. To replace, align the endo housing with the front housing. Carefully and gently lower the endo housing into the front housing until the catches along the sides of the front housing snap into position.
