RECORDING
Recording from the radio 1. Tune to the desired radio station (See TUNING TO RADIO STATIONS). 2. Press STOP�OPEN 9/ to open the cassette door. 3. Insert a suitable cassette into the cassette deck and close the cassette door. 4. Press RECORD 0 to start recording. � If you are recording from MW/LW stations, adjust the BEAT CUT switch to eliminate possible whistle tones during recording. 5. For brief interruptions, press PAUSE ;. To resume recording, press PAUSE ; again. 6. To stop recording, press STOP�OPEN 9/. MAINTENANCE Tape deck maintenance To ensure quality recording and playback of the tape deck, clean parts A,B and C shown in the diagram below, after approx. 50 hours of operation, or on average once a month. Use a cotton bud slightly moistened with alcohol or a special head cleaning fluid to clean the deck. 1. Open the cassette door by pressing STOP�OPEN 9/. 2. Press PLAY 1 and clean the rubber pressure rollers C. 3. Press PAUSE ; and clean the magnetic heads A and also the capstan B . 4. After cleaning, press STOP�OPEN 9/. Note: Cleaning of the heads can also be done by playing a cleaning cassette through once. English
MAINTENANCE
CD
TUNER
BATT LOW
TAPE
OFF
DBB
VOL
DYNAMIC BASS BOOST
PAU SE
STO
P�OPEN
PLAY�PAU SE
SEARCH PLAY
RECORD
1
CD PROGRAM
REPEAT ALL
REM OTE SEN SOR
CD
MODE
CBA
A
Environmental information All unnecessary packaging material has been omitted. We have done our utmost to make the packaging easy to separate into three mono-materials: cardboard (box), expandable polystyrene (buffer), polyethylene (bags, protective foam). Your set consists of materials which can be recycled if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packing materials, exhausted batteries and old equipment. 12
