EXT SETTING 3 Press the 6 buttons to choose a name. Then press the a button The ID LIST disappears and the name is assigned to the EXT terminal. � You cannot assign an EXT terminal name not found in the name list (ID LIST). To erase a name assigned to the EXT terminal: Choose a blank space. 4 Press the a button to complete the setting TV: The picture and sound of the TV channel you are currently viewing are output from the EXT-2 terminal. � During dubbing, you cannot turn off the TV. Turning off the TV also turns off the output from the EXT-2 terminal. � When you choose an EXT terminal as an output, you can view a TV programme or a picture from the other EXT terminal while dubbing the picture from a device connected to the EXT terminal onto a VCR connected to the EXT-2 terminal. � The RGB signals from the TV games cannot be output. Teletext programmes cannot be output.
DUBBING
You can choose a signal source to be output from an EXT-2 terminal. You can choose any one of the output signal of the device connected to the EXT terminal and the picture and sound from a TV channel you are currently viewing to output it to the EXT-2 terminal. 1 Press the 5 buttons to choose the arrow from the menu
EXT SETTING EXT-1
EXT-3
DUBBING EXT-2
EXT-4
TV
BACK
TV OK
D0022-EN
2 Press the 6 buttons to choose an EXT terminal or TV. Then press the a button The arrow in the menu represents a signal flow. The left side of the arrow denotes a signal source output from the EXT-2 terminal. EXT-1/EXT-3/EXT-4: The output signal of the device connected to an EXT terminal passes through the TV and is output from the EXT-2 terminal.
