4.6.5 VIDEO CIRCUIT The setting (adjustment) using the REMOTE CONTROL UNIT is made on the basis of the initial setting values.The setting values which adjust the screen to the optimum condition can be different from the initial setting values. Setting item (Adjustment item) 2. V/C 1.RGB BLK 2.CUTOFF R 3.CUTOFF G 4.CUTOFF B 5.WDR R 6.WDR G 7.WDR B (Do not adjust) 8.BRIGHT 9.CONTRAST 10.COLOUR 11.HUE 12.SHARP (Do not adjust) TV EXT PAL --- (OFF) 100 132 124 165 135 150 -30 40 36 ---2 0 18 322 284 1096 1137 Initial setting value SECAM --- (OFF) 100 132 124 165 135 150 -30 40 31 ---2 0 --322 284 1096 1137 NTSC --- (OFF) 100 132 124 165 135 150 -30 40 25 : NTSC 3.58 0 : NTSC 4.43 2 : NTSC 3.58 0 : NTSC 4.43 -2 0 --328 290 1108 1150
13.SC ADJ. (Do not adjust) 14.SIDE .P.P (Do not adjust) 15.SIDE .P.W (Do not adjust) REGULAR 14:9 ZOOM REGULAR 14:9 ZOOM Measuring instrument Signal generator Remote control unit
Item WHITE BALANCE
Test point
Adjustment part [2. V/C] 2.CUTOFF R 3.CUTOFF G 4.CUTOFF B 5.WDR R 6.WDR G 7.WDR B (Do not adjust)
Description � Set the PICTURE MODE to STD. � Set the COLOUR TEMP to NORMAL. (1) Receive a black and white signal (colour off). (2) Select 2.V/C. (3) Each select 2.CUTOFF R, 3.CUTOFF G, 4.CUTOFF B and adjust the screen until the black portion in the screen becomes black. (4) Each select 5.WDR R, 6.WDR G and adjust the screen until the white portion in the screen becomes white. NOTE: Do not adjust 7. WDR B (5) Press the [MENU] key and memorize the set value. (6) Change the contrast and brightness from low-light to high-light and check that the tracking of the white balance is good.
SUB BRIGHT
Remote control unit
[2. V/C] 8. BRIGHT
Receive any broadcast. Select 2.V/C. Select 8.BRIGHT. Set the initial setting value. If the brightness is not the best with the initial setting value, make fine adjustment until you get the best brightness. (6) Press the [MENU] key and memorize the set value.
