|
No hay comentarios de productos.
MISFEED REMOVAL
3
Raise the fusing unit release lever and then close the side cover by pressing the round projections near the side cover open button. The misfeed ( ) indicator will go out and the ready ( ) indicator will light up.
C Misfeed in the transport area
1
Lower the fusing unit release lever by rotating it all the way as shown in the illustration. While you are lowering the fusing unit release lever, it will not move smoothly at a location on the way. However, be sure to lower the lever by rotating it all the way to the location where it will not rotate as shown in the right illustration.
Fusing unit release lever
2
Push gently on both sides of the front cover and open it.
6
Copier trouble?
3
Rotate the feeding roller in the direction of the arrow and gently remove the misfed paper from the exit area.
Feeding roller
4
Raise the fusing unit release lever, close the front cover and then close the side cover by pressing the round projections near the side cover open button. The misfeed ( ) indicator will go out and the ready ( ) indicator will light up. When closing the covers, be sure to close the front cover securely and then close the side cover. If the covers are closed in the wrong order, the covers may be damaged.
27
chap-6_AR121151EX.p65 27 30/11/00, 19:08
|
