Using the Viewfinder/LCD Monitor
$ Using the Viewfinder
Before using the Viewfinder, adjust the field of view so that the displays inside the Viewfinder become clear and easy to read.
2
Adjust the LCD Monitor angle according to the desired recording angle.
1
Pull out the Viewfinder and tilt it up.
1 180°
2 90°
OThe angular part of the Viewfinder can be turned upward by 80° and downward by 38°. ODo not pull on the Eyecup to extend the Viewfinder.
2
Adjust by sliding the Eyepiece Corrector Knob I.
OThe LCD Monitor can rotate a maximum of 180° 1 from the vertical position to the upward direction and a maximum of 90° 2 to the downward direction. Forcefully rotating the LCD Monitor beyond these ranges will damage the Camera Recorder. OWhen you open the LCD Monitor, be sure that the LCD Monitor and the Viewfinder cannot touch. Closing the LCD Monitor Push the LCD Monitor until it is securely locked.
12:30:45 AM 12:30:45 AM OCT 15 2002 OCT 15 2002
12:30:45 AM OCT 15 2002
I
$ Adjusting Brightness and Color Level $ Using the LCD Monitor
With the LCD Monitor open, you can also record the picture while watching it. When [LCD/EVF SET] on the [DISPLAY SETUP] SubMenu is set to [YES], the following items are displayed.
LDEFST C/V E LDBIHNS C RGTES []||--+ -||--[] LDCLRLVL C OO EE []||--+ -||--[] EFBIHNS V RGTES []||--+ -||--[] PS UHMN EUT ORTR EUN
1
Press the [PUSH OPEN] Button : and, at the same time, bring the LCD Monitor ; out about 90° in the direction of the arrow.
; :
LCD Brightness [LCD BRIGHTNESS] It adjusts the brightness of the image on the LCD screen. LCD Color Level [LCD COLOR LEVEL] It adjusts the color saturation of the image on the LCD screen. Brightness of the Viewfinder [EVF BRIGHTNESS] It adjusts the brightness of the image in the Viewfinder. To Adjust Press the [PUSH] Dial and select the item to be adjusted, and then turn the [PUSH] Dial to raise or lower the number of vertical bars in the Bar Indication. OA larger number of vertical bars indicates stronger brightness or color saturation. Increasing the Brightness of the Entire LCD Monitor Set the [LCD MODE] on the [DISPLAY SETUP] SubMenu to [BRIGHT]. OThese adjustments do not affect the recorded images. OFor other notes concerning this item, see -49-.