2. PC EVR (ADJUSTMENT) SOFTWARE
2-1. BOOT UP THE ADJUSTMENT SOFTWARE
1. At the first, copy the EVR software from floppy disc (VFK1837) to the HDD in your Personal Computer (PC). 2. Power ON the PC. 3. Restart the PC in DOS mode. 4. Boot up the EVR program as the following steps. 1) Type �a:� and then press the �ENTER� key. C:¥WINDOWS>a:
2-2. How to Use the Main Menu
Select a Sub Menu to check, adjust the unit and etc. by pressing ¯ (UP/DOWN) Key in Main Menu. Then press �ENTER� Key. the Sub Menu will be displayed. Note: Menu (pages) 3,4 and 5 are needed for adjustment. The menu (page) 5 is not available for AG-DVC7P because it has no LCD monitor.
2) Type �cd � and then press the �ENTER� key.
Fig.E7 With using ¬® keys, also the menu can be changed. 3) Type the �cd agdvc7p� and press the �ENTER� key.
4) Type the �dvc7� and then press the �ENTER� key.
Fig.E8
5) Wait for a few seconds so that the EVR adjustment program is started. 6) For the adjustments, follow the program display.