WHIRLPOOL ACQ214XD1
Manual de Usuario

Troubleshooting
Listed in the chart below are the most common problems consumers run into with their air conditioners. Please read through this chart before calling for service. It couM save you the cost of a service call.

PROBLEM Air conditioner won�t run

CHECK THE FOLLOWING
l l l l l

Is the unit plugged into a live circuit with proper voltage? Has the time-delay fuse blown or circuit breaker tripped? Is the Fan Control set to OFF? Is the Thermostat Control set correctly?

Has the local power failed? Are time-delay fuses being used? Is an extension cord being used? DO NOT use an extension cord with this or any other appliance. Are you waiting 3 minutes before trying to restart the unit? Is the air fitter clean? Are the inside evaporator coils and the outside condenser coils clean? Is there excessive moisture or heat in the room (open vessel cookiig, showers, etc.)? Is the Fan Control set too low�? Is the Thermostat Control set too low?

Unit blows fuses or trips circuit breaker

l l

l

Unit turns on and off OR does not cool the room

l l

l

l l

Normal

operating

sounds

When your air condiiioner operates normally, you will hear sounds such as: l PINGING or CLICKING as water droplets hit the condenser. Water droplets help cool the condenser. l AIR MOVEMENT from the fan, especially on QUICK COMFORT setting. l CLICKS from the cooling cycle. Sounds may also be caused by house construction - such as vibration of the unit due to wall construction or an unsteady window mounting area.

10