WHIRLPOOL AC0802XS1
Manual de Usuario

Using the Exhaust Vent Control
This control setting can be used to draw stale smoky air from the room, or to circulate air in the room without cooling.

NOTE: Make sure the Exhaust returned to the CLOSED setting room air circulation is desired. 2. To circulate room air

Vent control when cooling

is or

1. To exhaust

room air

Set control to OPEN. Set FAN SPEED CONTROL to desired setting. Set the fan control to FAN ONLY if no cooling is desrred.

Set control CONTROL desired.

to CLOSED. Set FAN SPEED to FAN ONLY if no cooling is

Changing Air Direction
The louvers in the grille area conditioner control the direction at the top of the air of the cooled air.

Cleaning and Caring for Your Air Conditioner
Proper use and care of your air conditioner will help Follow for an Insure longer life and lower operating costs. these instructions carefully or call your dealer annual checkup.

The tabs at the top of the grille can be moved to the right. left or straight ahead. Move the tabs in the drrection In which you want the arr to flow.

Cleaning Front Panel

Electrical Shock Hazard Disconnect from electrical supply before cleaning unit. Failure to do so could result in

1. Remove the front panel from unit for cleaning. Press down at top edge of the front as shown below. 2. When the front moves away from top of cabinet, top of front toward you. pull

4