EMERSON 6719DB1
Manual de Servicio

PLAYBACK
NORMAL PLAYBACK
Make sure ... � TV/DVD/VHS power must be turned on.

SLOW MOTION
During pause, press the FWD button to reduce the playback speed. The TV/DVD/VHS mutes the sound during slow motion. Press the PLAY button to return to normal playback. NOTE: If it is left in the Slow mode for more than five minutes, the TV/DVD/VHS will automatically go into the Stop mode.

1

Insert a prerecorded tape

If the erase-protection tab has been removed, the TV/DVD/VHS will start playback automatically.

2

To begin playback

PLAY B

PICTURE SEARCH
This feature is very useful in finding or skipping over a particular scene on a tape. In this mode, the sound will be muted. 1)You may view a video tape at a high speed in either a forward or reverse direction by pressing the F.FWD or REW button. (in the SP / LP / SLP modes) NOTE: � If you press the F.FWD or REW button in the DVD mode, the VCR forward or reverse will start. Please press the STOP button to stop it. 2)Press it again and the TV/DVD/VHS will now search in super high speed. (in the LP / SLP modes only) NOTE: Tapes recorded in the SP or LP mode will display a noise bar on the TV screen and the picture may revert to Black and White. This is normal. 3)Press the PLAY button to return to normal speed.

Press the PLAY button.

3

To stop playback

STOP

Press the STOP button when playback is completed.

NOTES: � If you press the TV/VCR side PLAY button in the DVD mode, you can start the VCR playback.

� If you press the SELECT button in the VCR
playback, it will stop and the mode will change to the DVD mode. In addition, the same function operates with the DVD side PLAY button or OPEN/CLOSE button.

TRACKING ADJUSTMENT � Tracking adjustment will be set automatically

STILL PICTURE

You can view a still picture on the TV screen during (Digital Tracking function) when you start playplayback (the Still mode). Press the PAUSE button back. during playback. Only tapes recorded in the SLP � However when playing pre-recorded tapes or tapes mode will show the least amount of lines.Press the recorded on units other than your own, noise lines PLAY button to return to playback. (black and white streaks) may appear on the playNOTES: back picture. If this occurs, you can adjust the � You can advance the picture one frame at a time by tracking control manually by pressing the CHANpressing the PAUSE button during the Still mode. NEL K or L button until the streaks disappear. To � If it is left in the Pause mode for more than five return to the DTR function, stop the tape once and minutes, the TV/DVD/VHS will automatically start playback again. switch to the Stop mode. � You can reduce the noise lines by pressing the CHANNEL K or L button in slow mode, too. VERTICAL HOLD CONTROL Tracking adjustment in Slow mode will not be set automatically. In the Pause/Still mode only, when the picture begins NOTE: to vibrate vertically, stabilize the picture by pressing � In Still mode, press the SLOW button and press the the CHANNEL K or L button. CHANNEL K or L button until streaks disappear. NOTE: To return to Still mode, press the PAUSE button If there are video noise lines on the screen, see Tracking again. Adjustment section. - 26 EN
1C29