TOSHIBA 33H24G
Manual de Usuario

� Pressing � swers.

� button again will conceal the revealed an-

equipment to the EXT 2 terminal of TV. See your equipment's booklet to check if your equipment has such feature.

To Stop Automatic Page Change
The teletext page you have selected may contain more information than what is on the screen; the rest of the information will be displayed after a period of time. � Press � � Press � played. � button to stop the automatic page change. � button again to allow the next page to be dis-

S-VHS
If the equipment connected to your TV set supports S-Video (Y/C) output from S-VHS connector, you can have a better picture quality by selecting S-VHS mode and connecting your equipment to the S-VHS terminal of TV. S-VHS and FRONT AV will share the same audio sockets. In fact there will be only one pair audio channel as audio left and audio right.

To Enable MIX Mode
� Press � � button while Teletext mode is active. The text is now superimposed over the program on the screen.

Back-AV output:
Connect your camera or camcorder at the back side of your TV. � Connect your equipment to the TV via VIDEO, AUDIO R and AUDIO L inputs. You should connect the jacks to the input in the same colour. Back AV output outputs only the information coming from the ANT (aerial) socket, so you can not output external sources from Back AV output. For this purpose you should use EXT2 Output.

To exit Teletext
� Press � Teletext mode is active. The screen will switch to TV mode. � button twice or press �EXIT� button while

Fastext and Toptext
Teletext mode will be selected according to transmission automatically. Your CTV supports the 7 page Teletext system. When the page number of any of the 7 pages in memory is entered, the system will not search for the requested page; instead it will display the page automatically. � Press � � button to move the Teletext screen forward one page at a time. � Press � � button to move the Teletext screen backward one page at a time.

Via the RCA jacks
If you have an equipment (such as a Camcorder) which has the RCA jacks, connect it to the F AV (Front AV) terminal with the video and audio cables. � If the epuipment has the mono audio jack, connect it to the AUDIO-L jack.

Via the ANT (aerial) socket
If your equipment does not have a Euroconnecter or RCA jacks, connect it to the TV with an aerial cable. For details, see the manual provided with the equipment. � To store the test signal that comes from the equipment in a programme number, follow the instructions of "Tuning menu" on page 8. The programme number 0 is usually used for the external equipment. � After storing, you can watch images from the equipment by selecting the programme number which you stored the test signal.

For Fastext and Toptext
The subject-heading for the information may have a particular colour or can be in a form located in a coloured box. � Press an appropriate RED, GREEN, YELLOW or BLUE button in order to reach the relevant page quickly.

For TOPTEXT
If Toptext transmission is present, colour coded buttons will appear in status row. If Toptext transmission is not present, status row will not appear. In Toptext mode the � � or � � commands will request the next or previous page respectively. If Toptext transmission is not available, in case of operation of these commands, wraparound occurs. For example page 100 appears to be one greater than page 199.

TV and Video Recoder (VCR)
� Connect the Video Recorder to the ANT (antenna input) socket of the TV with the aerial cable. � Connect the Video Recorder to the EXT 1 or EXT 2 terminal with the SCART cable, or connect it to the F AV (Front AV) terminal with the audio and video cables. � When you watch a picture from your VCR and the picture is unstable, you may improve it by changing the "Mode" setting in the "TUNING" menu. (See the "Tuning Menu" on page 8.)

Connect the External Equipments
Via the Euroconnector
Your TV set has two Euroconnector sockets. If you want to connect equipments (e.g. video recorder, decoder, etc.) which have Euroconnectors, to your TV, use the EXT 1 or EXT 2 terminals.

NTSC Playback
Connect a NTSC video recorder to a terminal. Then press � � button to select the corresponding AV mode. NTSC 3.58/4.43 system is detected automatically in AV mode.

EXT 2 S Mode
If the equipment connected to your TV set supports S-Video (Y/C) output from Euroconnector, you can have a better picture quality by selecting EXT 2 S mode and connecting your

Copy Facility
You can output the video and audio signals which inputs from TV, EXT 1, F AV (Front-AV) terminal to the video recorder connected to the EXT 2 terminal.

ENGLISH - 14 -