Operating Sequence
Before the first wash, we recommend that you pour 2 litres of water into the main wash compartment of the detergent drawer in order to activate the ECO valve. Then run a synthetic cycle at 60°C, without any laundry in the machine, to remove any manufacturing residue from the drum and tub. Pour 1/2 a measure of detergent into the dispenser drawer and start the machine. WASHING 5 KG OF WHITE COTTON AT 90°C Suppose you have 5 kg of heavy soiled laundry to wash. It is white cotton and is suitable for high temperature washing.
3. Select the required programme
Turn the programme selector dial to the 90 programme. The light Start/Pause starts to flash.
1. Load the laundry
Open the door by carefully pulling the door handle outwards. Place the laundry in the drum, one item at a time, shaking them out as much as possible. Close the door.
4. Select the spin reduction or option
Press the option button repeatedly, to select the desired option. The relevant light illuminates.
P0004
5. Select the required option(s)
Select �Prewash� or �Super Rinse� option if required, the corresponding light illuminates.
2. Measure out the detergent and the fabric softener
Pull out the dispenser drawer until it stops. Measure out the amount of detergent required, pour it into the main wash compartment and, if you wish to carry out the prewash phase, pour it into the compartment marked . If required, pour fabric softener into the compartment marked (the amount used must not exceed the �MAX� mark in the drawer). Close the drawer gently.
