4. Select the spin speed or option or
Turn the dial to the required position.
1200 1 0
7. At the end of the programme
The machine stops automatically. If you have selected the RINSE HOLD option , the machine will stop with the water of the last rinse left in the tub, to prevent the fabric from creasing. To drain only, select position or the drain programme �S�. To drain and spin, select programme �M� or turn the spin speed selector dial to the desired speed position: the machine will spin at the selected speed. The door is controlled by a safety device which releases 2 minutes after the end of the programme. Switch the machine off by depressing the ON-OFF button again. The mains-on light goes out. When the programme has finished you are advised to unplug the appliance and turn off the water taps.
0 5
0 4 5 0
0 0
6
750
5. Select the programme
Turn the programme selector dial clockwise to the programme K.
K
M0017a
6. Start the machine
Before starting up the machine check that: � the appliance is plugged in � the water supply taps are turned on � the drain hose is correctly and securely positioned � the door and the detergent dispenser drawer are closed. Depress the ON-OFF button: the mains-on light will illuminate and the machine starts operating.