Tip If you made a mistake, press CANCEL. The setting entered last will be cleared. Re-enter it.
4
Set the timer to the hour and the minutes you want the music to go on. 1 Turn the jog dial to set the hour and press ENTER�MEM. 2 Turn the jog dial to set the minutes and press ENTER�MEM.
5 6
Set the timer to the hour and the minutes you want the music to go off. (Do as step 4.) Turn the jog dial to set the volume you want, and press ENTER�MEM.
Tips � To exit the standby mode, press STANDBY to make the indication disappear. � The preset settings remain until you reset them.
7
Press STANDBY. The indication lights up and the power goes off; the player enters the standby mode. At the preset time, the power will go on and music will play. Then the power will go off at the preset time, and the player will enter the standby mode again.
To check/change the waking up timer settings Press TIMER, then ENTER�MEM. Each time you press ENTER�MEM, a stored setting is displayed in the set order. To change the setting, display the setting you want to change and re-enter it. To use the player before a timer playback starts If you turn on the player, you can use it as usual ( in case of the radio, if you listen to the station which is different from the one you tuned in step 1 on page 25, you will hear that station at the preset time.) Turn off the player before the preset time. To stop play Turn off the power.
