6. Select the required options
The light corresponding to the depressed button illuminates.
The machine starts operating. If a delayed start has been selected, the countdown will start.
START PAUSE
QUICK WASH SUPER RINSE EASY IRON
PREWASH
DAILY
7. Select the DELAY START
To delay starting of the programme, press the DELAY START button. The figures corresponding to the selected delay will be displayed for about 3 seconds, after which the duration of the selected programme will appear on the display.
8. At the end of the programme
The machine stops automatically. The display shows a blinking zero. If the RINSE HOLD option has been selected, the door will be locked, the light of the START PAUSE button and the (DOOR) pilot lights go out , the only light remains lit to indicate that the water must be drained before opening the door. The display shows a flashing zero. To empty out the water you can, after turning the programme selector dial to X position: � select programme (DRAIN), the water is emptied out without spinning � select programme (SPIN) or (DELICATE SPIN). Select the spin speed by means of the relevant button and then depress the START PAUSE button. The water is emptied out and the laundry is spun at the selected spin speed. At the end of the cycle, the light of the START/PAUSE button and the (DOOR) pilot light go out, and the (END) light illuminates. The door can be opened. Turn the programme selector dial to Reset X. Switch the machine off by pressing the ON/OFF button. Remove the laundry from the drum and carefully check that the drum is empty so as to avoid any forgotten items being damaged in a subsequent wash (e.g. shrinking) or their colour running into a load of whites. If you do not intend to carry out another wash, close the water tap. Leave the door open to prevent the formation of mildew and unpleasant smells.
DELAY START
During this period it is possible to load other laundry:
�
depress START PAUSE button; load the laundry; �
�
close the door and depress START PAUSE button again.
8. Start the programme
To start the selected programme, press the START/PAUSE button; the corresponding light stops flashing and the (DOOR) pilot light illuminates. The pilot light corresponding to the wash phase which is running is on.
