|
|
|
Usuarios conectados
Actualmente hay 5882 visitantes online. |
|
Support Info
BOX_MANUFACTURER_SUPPORT_FIRST_CONTACT
BOX_MANUFACTURER_SUPPORT_TRADEMARKS |
|
Productos
|
|
Información
|
|
Destacado
|
|
|
 |
|
|
No hay comentarios de productos.
Adaptation to different types of gas !Injectors replacement
Remove the pan supports. Remove the burner's caps and crowns. With a socket spanner 7 unscrew and remove the injectors (Fig. 5), and replace them with the ones required for the type of gas in use (see Table "injectors"). � Reassemble the parts, following the same procedure backwards. � Replace the rating label (placed near the gas supply pipe) with the relevant one for the new type of gas supply. You can find this label in the package of the injectors supplied with the appliance. Should the feeding gas pressure be different or variable compared with the required pressure, an appropriate pressure adjuster must be fitted on the gas supply pipe, in compliance with the rules in force. � � �
Fig. 5
!Adjustment of minimum level
To adjust the minimum level of the burners, proceed as follows: � Light the burner. Fig. 6
� Turn the knob on the minimum position. � Remove the knob. � With a thin screwdriver, adjust the by-pass screw
(see Fig. 6). If changing from natural gas 20 mbar to liquid gas, completely tighten the adjustment screw until a small regular flame is obtained. If changing from liquid gas to natural gas 20 mbar, undo the by-pass screw about 1/2 of a turn. If changing from natural gas 20 mbar to natural gas 13 mbar undo the by-pass screw about 1/4 of a turn. If changing from liquid gas to natural gas 13 mbar, undo the by-pass screw about 3/4 of a turn.
By-pass screw
Table: By-pass diameters
Burner � By-pass in 1/100 of mm. 28 32 40
Auxiliary Semi-rapid Rapid
� Finally check the flame does not go out when quickly
turning the knob from the maximum position to the minimum position. This procedure can easily be carried out, anyhow the hob has been positioned or built in the working top.
Table: injectors
TYPE OF GAS TYPE OF BURNER INJECTORS MARKS 1/100 mm NOMINAL POWER INPUT KW 3,00 2,00 1,00 2,80 2,00 1,00 2,13 1,72 0,90 REDUCED POWER kW NOMINAL POWER 3 m /h 0,286 0,190 0,095 0,210 0,186 0,085 g/h 202 144 72 NOMINAL PRESSURE mbar
NATURAL Rapid (large) GAS Semi-rapid (medium) G 20 Auxiliary (small) LPG Rapid (large) (Buthane/ Semi-rapid (medium) Propane) Auxiliary (small) NATURAL Rapid (large) GAS Semi-rapid (medium) G 20 Auxiliary (small) * for Russia only.
119 96 70 86 71 50 108 105 80
0,65 0,45 0,33 0,65 0,45 0,33 0,52 0,42 0,30
20
28-30/37
13*
9
|
|
|
> |
|
