Door reversal (Fig. 3)
Unplug the appliance before all operations. To reverse the door, proceed as follows: dismantle the lower hinge (3), pin (1) and the screw (2); slide the door out from pin (5), unscrew the pin and reposition on the opposite side; unscrew the left front foot and reposition on the opposite side; unscrew the two screws which mask the holes for �xing the hinge from the left front side; reassemble the door; reassemble the lower hinge (turning it 180°), the pin and the screw on the opposite side, as shown in the �gure; dismantle the handle (6) and reassemble it on the opposite side.
2 1 3
D193
Fig. 3
5
6
Fig. 3a
The holes that are not used are to be masked with the plastic plugs removed. Attention After completion of the door reversibility operation, verify that the door gasket is adherent to the cabinet. If the ambient temperature is cold (i.e. in Winter), the gasket may not �t perfectly to the cabinet. In that case, wait for the natural �tting of the gasket or accelerate this process by heating up the part involved with a normal hairdrier.