KENWOOD Z919
Manual de Usuario

Stopwatch
You can use the clock as a stopwatch.

1 Press the CLK button to select the stopwatch mode.

To set the time to "0:00" Press the S/S button for at least one second to return the time to "0:00".

NOTE

Once the stopwatch mode is selected, "STOP WATCH" will be

4 Press the CLK button to end the time setting for timer. 5 To start the timer
Each time you press the S/S button, the timer will start and stop. When you start the timer, the indicator will light up and the time counting will start. If you want to clear the setting time of the timer Press the S/S button for at least one second. Then the setting time of the timer will return to the time set in the step 3.
NOTE

displayed. When you enter the stopwatch mode, the round sound level indicator changes its display to indicate the stopwatch mode. 2 To start the measurement Press the S/S button.

3

To stop the measurement Press the S/S button.

If you want to clear the time Press the S/S button for at least one second. Then the time indication will return to "0:00'00"0".

NOTE

6 When the time set in the step 3 has passed
The timer will beep for five seconds. You can immediately stop the beep by pressing the S/S button, or leave it without any action for about 5 seconds.

4 To restart the measurement
Press the S/S button to restart the measurement.

Timer
You can use the clock as a timer. Once you set a time, the timer will beep when the set time has past.

1 Press the CLK button to select the timer mode.
Once the timer mode is selected, "TIMER" will be displayed. When you enter the timer mode, the round sound level indicator changes its display to indicate the timer mode. Time Setting: 2 Press the ADJ button for at least two seconds. "TIMER ADJ" is displayed, and then you can set a time for the timer.

3 You can adjust hours with the FM/AM button, and minutes with
the 4/¢ button.

� 11 �