|
No hay comentarios de productos.
(8) (9)
Remove operating arm from the protrusion on the the
slide base (arrowhead A). .* \ B and .� .1 & .:.,, : ~. ; zfic)ijufi..)~:fq b~Gzlnb;r from the groove, Then, Z-70 ::,: *:
Rotate the zoom lens in the arrow dir~tion
remove the cam follower remove the lens assembly. ,�1
r.
.,.. ~; . ,-, , . . .
-�J f�,��. :-: /-;t}f:;~:..~ : > ,;$: .+,.1,.. ~, -... *, ,-, ~.~. : ~~ r !,..
//
arm
(
�k / \/ 2
CamfOllOwer {�.� ,,, ~o~� ( (Mirror installing precautions) (1) The mirrored surface must face the lens t. install Y��
$
y~[,
Groove
�
.-
When the lens is rotated, the cam follower also rotates to be disengaged
the mirror. (2) After. installation of the mirror fastener, make sure that the groove in the fastener is properly engaged into the groove.
from the groove. F. Replacing mirrors -. ---- --- .- ..
,. ~
o
�(
I
--,
x
�1
Remove the mirror fasteners from both mirror-l and mirror2, then remove the mirrors. ,
Lg[ . (~ �~\
�
&
Mirror g Ensure that it engates into the groow. Mirror fastener
�v
Mirror fastener
Remove three mirror fasteners for the NO.I mirror,
Remove mirror fasteners for the two
Do not move the mirror
the No,l mirror. Note positioning that
No.2 mirror. setscrew in removing --
,, ,<,
it is not possible to adjust it
in the field.
,
�30�
|
