HOW TO USE
Power Switch
1. This vacuum has a 3-position switch. O is Off, I is �Suction Only,� and II is �Suction and Brushroll.� 2. For bare �oor cleaning use suction only (I). For carpet cleaning, use suction and brushroll (II). The nozzle allows for low pro�le cleaning. Air�ow under the nozzle automatically directs suction to the edges and corners for maximum full width cleaning.
On/Off Switch
2
1
ROUTINE MAINTENANCE
The instructions in this booklet serve as a guide to routine maintenance. To keep the cleaner operating at top ef�ciency empty the dust cup and clean the �lter after each use. To maximize cleaner ef�ciency do not allow the dust cup to be �lled past the bottom of the �lter.
HOW TO USE ROUTINE MAINTENANCE Empty Dust Cup
3
4
Empty Dust Cup
CAUTION: Turn off the power switch and unplug the electrical cord to service. 3. Push dust cup release button. 4. Pull the dust cup away from the main housing. 5. Rotate the dust cup lid counterclockwise to remove. The dust cup �lter comes out with the dust cup lid. 6. Empty the dust cup into a waste container. (To clean �lter refer to dust cup �lter section.) 7. Put the lid back on dust cup. Be sure the gasket on the �lter bottom is centered in the inner tube and the lid is aligned correctly on the cup. Rotate the dust cup lid clockwise until it locks. 8. Place the bottom of the dust cup in the main housing. Push the top of the dust cup back into place until it locks.
5 6
