Replacing the Projection Lamp
Then Change Lamp (Steps 7-10)
7
Remove the lamp cage cover.
8
Remove the lamp cage.
Turn over the projector and loosen the user service screw that secures the lamp cage cover. Then lift open the cover in the direction of the arrow.
Loosen the securing screws on the lamp cage. Hold the lamp cage by the handle and pull it towards you.
9
Insert the new lamp cage.
10
Attach the lamp cage cover.
Press the lamp cage firmly into the lamp cage compartment. Fasten the securing screws.
Slide the lamp cage cover in the direction of the arrow. Then tighten the user service screw.
Resetting the lamp timer
1
Connect the power cord.
2
Reset the lamp timer.
�LAMP 0000H� is displayed, indicating that the lamp timer is reset.
Plug the power cord into the AC socket of the projector.
Maintenance & Troubleshooting
1 Press KEYSTONE � and KEYSTONE � on the projector at the same time. 2 Press INPUT and PICT MODE on the projector at the same time. 3 Press PICT MODE and MENU on the projector at the same time.
1
INPUT PICT MODE
2
BACK
ENTER
MENU
3
� Reset the lamp timer only after replacing the lamp.