No hay comentarios de productos.
XV-SA70BK/XV-SA75GD
Removing the rear panel (see Fig.6)
*Prior to performing the following procedure, remove the top cover. 1.Remove the twelve screws E attaching the rear panel on the back of body. E
Removing the front panel assembly (see Fig.7,8)
* Prior to performing the following procedure, remove the top cover. * There is no need to remove the mechanism assembly. 1.Remove the one screw F attaching the front panel assembly on the bottom chassis. 2.Remove the four screws G attaching the foot on the bottom chassis. 3.Disconnect the wire from CN3, JT102 and JT202 on the main board respectively. 4.Hook c and d are removed respectively, and the front panel assembly is removed.
E
E
E Fig.6 G Foot
E
Hook d
G
Hook c
F
Hook d
Foot Fig.7
Removing the main board (see Fig.9)
* Prior to performing the following procedure, remove the top cover, surround audio board, mechanism assembly and rear panel. CN3 1.Disconnect the wire from CN3, JT102 and JT202 and on the main board respectively. 2.Remove the four screws H attaching the main board on the bottom chassis. Fig.8 H JT102 JT202
JT202 JT102
H CN3 H H
Fig.9
1-7
|