|
No hay comentarios de productos.
Basic operations
In the following description, the buttons on the remote control unit are mainly used, however, you may use the corresponding buttons on the front panel of the unit if available.
English
Turning on/off the unit
Press STANDBY/ON on the remote control unit or press on the front panel.
OPEN/ CLOSE
STANDBY/ON
XV-S332 DVD/SUPER VCD/VCD/CD PLAYER
STANDBY
OPEN/CLOSE
DOLBY
DIGITAL
STOP
PLAY
PAUSE
SKIP
STANDBY/ON
1 4 7 10 2 5 8 0 3 6 9 +10
STANDBY/ON
.
� You can turn on the unit by pressing the 3 button. In this case, the unit starts playback if the disc is set in the disc tray. � If no disc is set, �NO DISC� appears on the display window. � You can turn on the unit by pressing the 0 (OPEN/CLOSE) button on the front panel.
NOTE
� Even if you press one of the STANDBY/ON or to turn off the unit, the unit is not disconnected from the AC power source as long as it is connected to the wall outlet. This state is called the standby mode. In this state, the unit consumes a very small amount of power.
Inserting and removing discs
1 Press 0 (OPEN/CLOSE) to open the disc tray. 2 Place the disc in the tray.
With the label side up Basic operations
SKIP E PAUS PLAY STOP E OS /CL EN OP
ER PLAY D/CD D/VC R VC PE D/SU 332 DV -S XV
� To insert an 8-cm disc, place it in the inner recess.
LBY DO A L
IT D IG
STA
NDB
Y
BY/ON ND STA
3 Press 0 (OPEN/CLOSE) to close the disc tray.
� If you press 0 (OPEN/CLOSE) during playback, the unit stops playback and opens the tray.
NOTES
� � The unit can playback DVD VIDEO, Audio CD, Video CD, SVCD and MP3 CD discs only. Do not load other disc types. For details about playable disc types, see page 12. When loading a disc in the tray, be sure to position the disc inside the recess. Otherwise, the disc may be damaged when the tray is closed, and the disc may not be removed from the unit.
17
|
