SECTION 2 Disassembly method
There is a part different from the photograph according to the destination though explains this disassembly method by using XVC5SL for Eastern Europe. 2.1 Main body section 2.1.1 Removing the bottom cover (See Figure 1, Figure 2) (1) Remove the three rubber caps on the bottom of the main body. *Remove the rubber caps by peeling them with your nails because they are only inserted in the holes. (See Figure 2) (2) Remove the three screws A (long) and one screw B (short) attaching the bottom cover on the bottom of the main body. (3) Lift the bottom cover, and remove it.