Assembling the Loading Base
9. Assembling parts of the loading mechanism 1) According to Figure 10, assembly gears and belt in order. 10. Assembling the traverse unit 1) Take the flexible wire from the traverse unit out of the loading base. 2) With the top of the traverse unit inserted in the groove of the rotary cam, tighten the four bolts 'I'. Tray gear Traverse unit Rotary cam I
I
I
I
Loading base
Figure 11
11. Assembling the loading tray 1) Turn the tray gear counterclockwise several revolutions until the traverse unit comes to the lowest position. 2) Push the rotary cam on point '1' in the direction of the arrow. 3) Make sure that the claws of the loading cam are all locked. 4) Insert the tray straight with respect to the loading base.
Tray gear Claw 1
Figure 12
12. Assembling the loading base 1) Mount the clamper plate and then the loading base on the main body.
