INTERFACES
This set has Audio & Video input and output sockets, which allow direct connection to external equipments for playing back the programs. VIDEO PLAYBACK The figure below shows how to connect the TV set to the VCR, VCD or other video equipment.
Press the AV button on the remote controller (or making use of the SYSTEM menu) to select AV mode, and �AV¡±will be displayed on the screen.. The picture shown on the screen is the program from the video equipment. NOTE: The VCR signal can be input by antenna input socket of the TV set, but the quality of the picture and sound is not better than that of video mode. RECORDING FROM THE TV SET The figure below shows how to connect the TV set to the video equipment
Press the AV button on the remote controller (or make use of the SYSTEM menu by pressing the MENU button) to set the receiver to TV mode, and choose the desired channel. Note: Changing the current channel should be avoided during recording.
