PIONEER X-SV5DV/NXCN/HK
Manual de Usuario

Editing MDs

10

� You cannot combine tracks recorded in different recording modes (for example LP2 and stereo); and you can't combine tracks if one was recorded via the digital input and the other was recorded via the analog input. � If both the tracks are named, then the new single track takes the name of the first track. If only one track is named then the new track takes that name. � Combining tracks that have been recorded in LP4 can result in a audible �click� where the track has been joined. � Make sure random and program play are off before starting. 1 During playback of the later track of the two, press 8 (remote) or MD 6 (front panel) to pause playback. Combine only works with two consecutive tracks, so if you wanted to combine tracks 3 and 4, pause during playback of track 4. 2 Press SYSTEM MENU and use the / (cursor up/down) buttons to select MD MENU, then press ENTER.

4 Press ENTER again to combine the tracks.

� To cancel the edit press 7 instead.

Moving tracks on a disc
Use this feature to change the position of tracks on a disc. This is especially useful for setting up consecutive tracks for groups (see also About groups on page 43).

� Make sure random and program play are off before starting. 1 Select the track you want to move. The easiest way to do this is by using the 4 and ¢ buttons while the MD is stopped. 2 Press SYSTEM MENU and use the / (cursor left/right) buttons to select MD MENU, then press ENTER.

3 Use the / (cursor left/right) buttons to select COMBINE, then press ENTER.

3 Use the / (cursor left/right) buttons to select MOVE, then press ENTER.

English
53
En