Timer recording radio programs
� Rec Timer
You can record a preset radio station from a specified time. To timer record, you must first preset the radio station (see �Presetting radio stations� on page 13) and set the clock (see �Setting the clock� on page 8). Use buttons on the remote for the operation.
10 Press ?/1 to turn off the system.
Other operations
To Do this
Activate the timer/ check the setting
1 Press CLOCK/TIMER
SELECT. 2 Press . or > repeatedly until �SELECT REC SEL?� appears, then press ENTER. Start over from step 1.
Change the setting Cancel the timer
1 Press CLOCK/TIMER
SELECT. 2 Press . or > repeatedly until �SELECT TIMER OFF?� appears, then press ENTER.
1 2 3
Tune in the preset radio station (see �Listening to a preset station� on page 14). Press CLOCK/TIMER SET. Press . or > repeatedly until �REC SET?� appears, then press ENTER.
Notes
Timer
�ON TIME� appears and the hour indication flashes.
4
Set the time to start recording.
� You cannot activate the Play Timer and Rec Timer at the same time. � If you use the Rec Timer and the Sleep Timer at the same time, the Sleep Timer has priority. � Do not operate the system from the time the system turns on until the recording starts (about 15 seconds before the preset time). � If the system is on about 15 seconds before the preset time, the Rec Timer will not be activated. � The volume is reduced to minimum during recording. � Note that if the Rec Timer is set at the same time as the Play Timer sound source is set to tape, the Rec Timer sound may be recorded onto the tape.
Press . or > repeatedly to set the hour, then press ENTER. The minute indication flashes. Press . or > repeatedly to set the minute, then press ENTER.
5
Set the time to stop recording following the same procedure as step 4.
Rec Timer settings and the desired station appear, then the original display returns.
6 7
Load a recordable tape. Press TAPE nN on the unit repeatedly to select recording side.
If you select both sides recording or front side recording, press TAPE nN on the unit to light up the N indicator. If you record on the reverse side, press TAPE nN on the unit again to light up the n indicator.
8 9
Press x. Press DIRECTION on the unit repeatedly until g appears to record on one side or h (or j) to record on both sides.
