SOUND ADJUSTMENTS
Adjustments
To switch to monaural FM reception Hold down SHIFT and press TUNER MODE on the remote so that "MONO" is displayed. To cancel, repeat the above so that "STEREO" is displayed. Tip: When FM stereo reception is poor, switching to monaural reduces noise. To switch the AM tuning interval The default setting of the AM tuning interval is 9 kHz/step. If you use this unit in an area where the frequency allocation system is 10 kHz/step, change the tuning interval. Hold down TUNER/BAND and press POWER on the main unit.
VOLUME +,MUTING VOLUME TONE f,g
f,g
TREBLE, BASS
En
Tip: When the AM tuning interval is changed, all preset stations are cleared.
Volume
Turn VOLUME (press VOLUME +,- on the remote).
Adjust from 0 (minimum) to 26 and MAX (maximum).
Bass and treble
1 Press TONE repeatedly (BASS or TREBLE on the
remote) to display "BAS" or "TRE".
"BAS" : Adjusts the bass level "TRE" : Adjusts the treble level
Muting
Press MUTING on the remote. Playback continues without sound and "MUTING" appears in the display.
2 Press f or g to adjust the level within 6 seconds.
Each level can be adjusted from "�2" to "+5". �If the sound becomes distorted, lower the level.