SONY XRCA800
Manual de Servicio

XR-CA800

Main unit

OPEN

XR-CA800

a Power on/off button* 7 b Display window c Z (eject) button (located on the front side of the unit, behind the front panel) 9 d OPEN button 7, 9 e Receptor for the card remote commander f RESET button (located on the front side of the unit, behind the front panel) 7

* Warning when installing in a car without an ACC (accessory) position on the ignition switch After turning off the ignition, be sure to press the power on/off button on the unit (or (OFF) on the card remote commander or the rotary commander) for 2 seconds to turn off the clock display. Otherwise, the clock display does not turn off and this causes battery drain. To turn the unit on, press the power on/off button (1) on the unit. Note

If the unit is turned off by pressing the power on/ off button on the unit (or (OFF) on the card remote commander or the rotary commander) for 2 seconds, it cannot be operated with the card remote commander or the rotary commander unless the power on/off button on the unit is pressed, or a cassette is inserted to activate the unit first.

Other Funct ions
You can also control the unit (and optional CD/ MD units) with a rotary commander.
RM-X5S (supplied)/RM-X4S (optional)

Inserting the supplied lithium battery (RM-X5S only)

Using the rotary commander
First, attach the appropriate label depending on how you want to mount the rotary commander. The rotary commander works by pressing buttons and/or rotating controls.

x
+ side up

SOUND MODE DSPL

DSPL MODE SOUND

Tip For information on lithium battery, refer to �Notes on lithium battery� (page 25).

4