|
No hay comentarios de productos.
LEVER (PINCH) ASS�Y
2 two polyethylene washers 1 Fit shaft of the lever (Pinch) ass�y in hole on the chassis (M) ass�y and install the lever (pinch) ass�y. B
shaft
C
shaft
shaft A
C
B
3 Install the spring (pinch press) to shaft A. Set the ends of spring to B and C.
HOUSING
5 Fit projections on C part. 2 Install the hanger on to two claws of the housing. 4 Fit claw on B part. 7 Holder the hanger by bending the claw. 1 Install the catch to the hanger.
hanger
6 Fit projections on D part.
3 Put the housing under A part.
C part 8 Holder the hanger by bending the claw.
D part
A part
B part
�9�
|
