Release HOLD. � a When not using the unit, set HOLD to the hold position. � b Accidentally pressed buttons will not function. If ePLAY/PAUSE is pressed while HOLD is set to the HOLD position, �HOLd� flashes in the display.
Turning the power on
Press ePLAY/PAUSE. Power is turned on and playback starts.
Note
�Err� appears on the display in the following cases: � When you try to play the unit without a disc in the disc compartment. � When you play a disc placed upside-down or a defective disc.
Standby mode
When an operation finishes, the unit goes into standby mode until the auto power off function automatically turns off the power. To enter standby mode, press e PLAY/PAUSE to start playback, then press sSTOP/OFF/CHARGE.