Dividing a track (DIVIDE)
A track can be divided into desired number of tracks by adding track markings in the middle, in the desired points or where you want to search later. This makes it possible to assign track numbers after recording medley music or FM broadcast. The track numbers after the divided track are renumbered automatically.
EDIT
1 Press EDIT on the main unit or on the remote control unit to select �DIVIDE�.
The DIVIDE indicator lights up. Each press of the button switches the editing functions as follows.
DIVIDE JOIN MOVE ERASE ALL ERASE
OR
Canceled (MD total playing time display or Disc title)
Blinks
12345 6
OR
SET
2 Press SET on the main unit or on the remote control unit.
Blinks Blinks
12345 6
3 Play a track to be divided. OR
Select a track number by turning the jog dial on the main unit or by pressing < / 4 or ¢ / > on the remote control unit. Then, press 6 on the main unit or 3 on the remote control unit. Blinks Blinks
12345 6
OR
�
�
Example) When track No. 3 is selected You can also use the numeric keys on the cover panel of the remote control unit to select the track number. To select a track, see �Selecting a track with the numeric keys� on page 9. You can use ¡ (or 1) to fast forward (or reverse) the track.
OR
SET
4 Press SET when a point where you want to divide the track comes.
�POSITION� is displayed and the track marking fine-adjustment display appears. Blinks Blinks
12345 67
Increments by 1 Example) Track No. 3 and 4 blink in the music calendar and the 4-second section from the divided point will be played repeatedly. � � � � When the track has been divided as desired, go to step 6. If the track has not been divided as desired, fine-adjust the track marking position. Go to step 5. If you notice that the selected track number is wrong, press 7STOP/CANCEL on the main unit or CANCEL on the remote control unit and repeat from step 3. If the display shows �TRACK PROTECTED�, the selected track has been protected against accidental erasure by another component. You cannot edit such a protected track. To cancel the editing, press EDIT on the main unit or on the remote control unit.
