JVC XL-R5010BKC
Manual de Usuario

Due to copyright and other considerations, the following restriction is now in place for CD-R and CD-RW discs onto which the digital signals of CDs have been copied.

English

English

SCMS (Serial Copy Management System)
The digital quality of CDs and other digital media can be recorded to CD-R and CD-RW using the CDR function of this unit. However, it is not possible to make a second generation digital copy from a first generation copy. This restriction, known as SCMS (Serial Copy Management System), is intended to prevent unlimited digital copying in the interests of artists and other copyright holders. This unit is designed to comply with SCMS restrictions.

Glossary
The following is a brief description of some of the acronyms used in this manual.

ATIP (Absolute Time in Pregroove)
The reflected light returned from the pregroove of a CD-R disc generates a carrier signal providing tracking, motor control and focus signals. Additional information including the Recommended Optimum Recording Power value is also encoded in a frequency modulation of the carrier signal.

CD-R (Compact Disc-Recordable)
The reference to recordable disc media. Also often referred to as write-once discs as data can only be recorded one time.

OUI
Digtal Recording

NON

CD-RW (Compact Disc-ReWritable)
Recordable disc media to which data can be recorded and erased repeatedly.

Source CD

First generation copy (CD-R or CD-RW)

Second generation copy (CD-R or CDRW)

OPC (Optimized Power Control)
Analysis of recordable CD media to determine the optimum power setting for recording of data to the disc.

The copyright laws allow recordings to be made for the personal enjoyment of the individual user but they do not allow such recordings to be used for any other purpose without permission from the rightful owner of the copyrights. Note � If digital recording of a first generation digital copy is attempted, �SCMS PROTECT� is shown in the information display, and the recording operation is canceled. � In the case of synchronized recording operations, Listening Edit recording and Program Edit recording, when the first-generation copy is a finalized CD-R or CD-RW disc loaded in the 3CD changer, the recording type is automatically changed from digital to analog, and the recording type indicators light accordingly. (If high-speed dubbing is turned on, it will be turned off when the recording type is changed.)

PCA (Power Calibration Area)
A space reserved at the beginning of a disc for calibrating the laser power needed to record that disc.

PMA (Program Memory Area)
On a recordable disc, it is the area that �temporarily� holds the information about the recordings on the disc: the track numbers and the track starting and stopping points when written in a session that is not yet closed (unfinalized disc). When the session is closed (the disc is finalized), this information is written to the TOC.

TOC (Table of Contents)
The area on a CD to which is recorded various information of the disc contents such as the number of tracks, their starting points, and the total length of the data area.

46