Programmed play
You can choose up to 32 selections for playback in the order you like.
1
Whilst in the stop mode, press the MEMORY/SET (MEMORY) button to enter the programming save mode.
To clear the programmed selections: Press the CLEAR/DIMMER button on the remote control whilst the "MEMORY" indicator is flashing. Each time the button is pressed, one track will be cleared, beginning with the last track programmed. To cancel the programmed play mode: Whilst in the stop mode and the "MEMORY" indicator is lit, press the CLEAR/DIMMER button on the remote control. The "MEMORY" indicator will disappear and all the programmed contents will be cleared. Adding tracks to the programme: If a programme has been previously stored, the "MEMORY" indicator will be displayed. Then follow steps 1 - 6 to add tracks. The new tracks will be stored after the last track of the original programme. To check which tracks are programmed: Whilst the unit is stopped in the programmed play mode, press the or button. Notes: When a disc with programmed tracks is ejected, the programme is automatically cancelled. Even if you press the ON/STAND-BY button to enter the stand-by mode or change the function from CD to another, the programmed selections will not be cleared. During the programme operation, random play is not possible. During programmed play, the CD DIRECT PLAY button will not work.
2
Press one of the 1 - 5 buttons to select the desired disc.
Selected disc number
3
Press the direct search buttons on the remote control to select the desired track. Selected track number You can also select a track by pressing the or button.
4 5
Press the MEMORY/SET (MEMORY) button to save the track number. Repeat steps 2 - 4 for other tracks. Up to 32 tracks can be programmed. If you make a mistake, the programmed tracks can be cleared by pressing the CLEAR/DIMMER button. Press the (CD ) button. The total number in memory will appear.