XL-E80E
1.5. How to remove the flywheel (See Fig. 5)
1. Remove the belt. 2. Remove the stop washer (E1) x 1 pc., with a small precision screwdriver to extract the flywheel from the capstan metal. NOTE: When the stop washer is deformed or damaged, replace it with a new one.
Mechanism Chassis
(E1)x1 Stop Washer Stop Washer Driver
Washerx2
1.6. How to reinstall the parts
Install each part in the reverse order of the removal with care.
Flywheel
Figure 5
1.7. How to remove the tape mechanism PWB (See Fig. 6)
1. Remove the screw (F1) x 1 pc., to remove the tape mechanism PWB. 2. Remove the screws (F2) x 1 pc. 3. Remove the solder joints (F3) x 2 pcs., to remove the tape mechanism PWB.
