Enter 02 if you want to keep the memories unchanged. Press and hold until you see PROCESSING....
Pause duration PAUSE 1 PAUSE 2
Index Number 78 79
5.3.6 Select flash duration This option is helpful when using operator services. The default value of flash duration that is preset in your XL340 should be the best suited for your country network and therefore you should not need to change it. In standby mode : 1 Press and hold until you see MENU?. 2 Enter the flash duration index number (see below). 3 Press and hold until you see the new setting is displayed. Flash duration FLASH 1 FLASH 2 FLASH 3 FLASH 4 FLASH 5 FLASH 6 FLASH 7 Index Number 71 72 73 74 75 76 77
5.3.8 Select dial mode (country dependent) The default value of dial mode that is preset in your XL340 should be the best suited for your country network and therefore you should not need to change it. In standby mode : 1 Press and hold until you see MENU?. 2 Enter 60. 3 Press and hold to confirm. � The new setting is shown.
5.3.9 Temporary tone dialing in pulse dial mode If the dialing mode is set to pulse, you can press and hold to set temporary tone dialing. � d will be displayed on the screen. All the following digits will be dialed as tones until you hang up. 5.3.10 Set prefix insertion The prefix insertion feature checks and formats your outgoing call number before it is dialed. If the first few digits of the number match with the digits you set as DETECT, they will be replaced by the digits you set as PREFIX. For example, you set DETECT as 604 and PREFIX as 967. When you are making a call to 6045551212, the actually dialed number will be 9675551212. The number shown is still 6045551212. In standby mode : 1 Press and hold until you see MENU?. 2 Enter 62. Press and hold . 3 Edit the DETECT digits OR 3 enter a new one if you see DETECT? (such as 604 in the above example). 4 Press and hold to confirm.
5.3.7 Select pause duration This option is helpful when using operator services. The default value of pause duration that is preset in your XL340 should be the best suited for your country network and therefore you should not need to change it. In standby mode : 1 Press and hold until you see MENU?. 2 Enter the pause duration index number (see next). 3 Press and hold until you see the new setting is displayed.
