|
No hay comentarios de productos.
2. CABI, MONITOR ASSY
(1) Remove the screws A (*2) and remove the HINGE, FRICTION. � Before disassembling, fully open the CABI, MONITOR ASSY. When assembling the ASSY, leave it open. (2) Remove the CABI, MONITOR ASSY from the unit. � Remove the three connectors from the holes.
CABI, MONITOR ASSY
A HINGE, FRICTION
THREE CONNECTORS HOLE CABI, TOP ASSY
(3) Remove the screws A (*2) under the FOOT, MONITOR and remove the CABI, MNT while sliding it in the direction of the arrow. Note During Assembling: Be careful not to pinch the wires and not to intertwist each wire.
(4) Pull the LCD, TFT in the direction of the arrow and remove the LCD power supply connector and FFCABLE, 30P 0.8 TFT from the PWB, TFT, then remove the LCD, TFT. Note During Assembling: Be careful not to disconnect the two wires.
CABI, MONITOR
FOOT, MONITOR
LCD, TFT
A
FF-CABLE LCD POWER SUPPLY CONNECTOR
6
|
