PANASONIC WVQ118
Manual de Usuario

5

Remove the Decoration Cover in order (1) then (2). The Decoration Cover can be removed by pressing on the points (1) at one place, and (2) at 4 places.

11

Attach the camera to the Camera Mounting Base, turn the camera clockwise, and tighten the Mounting Screw (M3, provided).

Rotate

15°
Notes: � Tigthen the Camera Fixing Screw with a screwdriver. � In attaching the camera to the Camera Mounting Base, loosen the Camera Fixing Screw (M3), then tighten it back with a screwdriver while keeping it pushed up. � The bracket is not shown in the illustration. Camera Press up

Camera Mounting Base

Decoration cover (1) Decoration cover (2)

6

Fix the Camera Mounting Base (provided with the camera) to the bracket with the four M4L8 Screws (provided).

12

Place the removed Decoration Cover (1) back on the bracket and camera.

Note: Be sure to fix the Camera Mounting Base in
the up direction as shown.

Note: Push the Decoration Cover up till it fits over
the bracket with a click.

Decoration cover (1)

7

Run the cable around the outside and secure it with the clamp. Secure the cable with the clamp so it goes along the inside of the top case so it does not get in the way when attaching the case and installing the camera.

Clamp

8

Attach the top case to the wall and run the cables. Attach it with four screws. Screws are not provided. Align it with the position the camera will be installed.

SPECIFICATIONS
Ambient Operating Temperature: Dimensions: Weight: 10�C - +50�C {14�F � 122�F} 165 (W) x 140 (H) � 217.5 (D) mm {6-1/2� (W) x 5-33/64� (H) � 8-37/64� (D)} 650 g {1.43 lbs}

Weight and dimensions indicated are approximate. Specifications are subject to change without notice.

9

Place the removed Decoration Cover(2) back on the bracket and camera.

Note: Push the Decoration Cover up till it fits over the bracket with a click.

STANDARD ACCESSORIES
Screw (M4-L8) ..................................................... 4 pcs. Template ................................................................. 1pc. Protection Cover ..................................................... 1pc.

Decoration cover (2)

For European and other fields: Matsushita Electric Industrial Co., Ltd. Osaka, Japan http://www.panasonic.co.jp/global/ For U.S. , Canadian and Puerto Rican fields: Panasonic System Solutions Company, Unit Company of Panasonic Corporation of North America Security Systems www.panasonic.com/security For customer support, call 1.877.733.3689 Executive Office: Three Panasonic Way 2H-2, Secaucus, New Jersey 07094 Zone Office Eastern: Three Panasonic Way, Secaucus, New Jersey 07094 Central: 1707 N. Randal Road, Elgin, IL 60123 Southern: 1225 Northbrook Parkway, Suwanee, GA 30024 Western: 6550 Katella Ave., Cypress, CA 90630 PANASONIC CANADA INC. 5770 Ambler Drive,Mississauga, Ontario, L4W 2T3 Canada (905) 624-5010 http://www.panasonic.ca Panasonic Sales Company Division of Panasonic Puerto Rico Inc. San Gabriel Industrial Park 65th Infantry Ave. KM. 9.5 Carolina, P.R. 00985 (809) 750-4300

10

Suspend the Fall Prevention Wire from the Camera Mounting Base.

Notes: � Make sure that the wire matches the Fall Prevention Wire Fixing Angle. � The bracket is not shown in the illustration. Ring of the Fall Prevention Wire

© 2005 Matsushita Electric Industrial Co., Ltd. All rights reserved.