CABINET SEPARATION PROCEDURE
MODELS: WS-65807, WS-65857, WS-65907, WS-73907
The cabinets for the above models are assembled in two pieces. The two pieces may be separated to allow easier delivery and setup. The following instructions show how to safely separate and re-attach the cabinets. Note: The guide pins under the cabinet top are prone to breakage if mishandled. Be sure to keep the cabinet top straight when removing, setting down and re-installing, being careful not to tilt backward or forward on the guide pins. 1) Remove the lower screw from each side of the TV back. On both sides, pull off the two plastic caps, and remove the two exposed screws. 2) Lift the cabinet top straight up until the guide pins clear the holes in the bottom cabinet. DO NOT use the screen frame when lifting the cabinet top. 3) Carefully place the cabinet top onto the floor. 4) When reassembling, set the cabinet top on the bottom. Be sure the guide pins align with the holes in the cabinet bottom. Keep your fingers clear of the edges being joined. Replace the caps and screws that were removed in step 1.
