|
No hay comentarios de productos.
SECTION 3 DISASSEMBLY
Note :
Set
Disassemble the unit in the order as shown below.
Case assy Belt Lid block assy, cassette Motor (M601) Holder (F) assy Ornament, reel Lever (N)/(R) assy, pinch Main board Head, magnetic (HP901)
Note :
Follow the disassembly procedure in the numerical order given.
3-1.
CASE ASSY
S11
S501
knob (ISS) Note: When assembling the case assy, align the knob (ISS) with the position of S501. S2
Claw 1 Lid, Battery
2 Two screws (M1.4 � 2.0)
knob (REC) Note: When assembling the case assy, align the knob (REC) with the position of S11.
5 Remove the case assy in the direction of the arrow. 3 Screw (M1.4 � 2.0) 4 Two screws (M1.4 � 2.5) knob (HOLD-B) Note: When assembling the case assy, align the knob (HOLD-B) with the position of S2.
�6�
|
