WHIRLPOOL WFS1285AW
Manual de Usuario

90102750GB.fm Page 9 Friday, April 27, 2007 3:22 PM

Water supply hose(s)
If a supply hose shows a damage, replace it by a new hose of the same type, available through our After-Sales Service or your specialist dealer. If your supply hose has a transparent hose coating (fig. �C�), periodically check the colour of the transparent coating. If the coating begins to turn red, this is an indication that the hose may have a leak and should be replaced. Contact our After-Sales Service team or specialist dealer to obtain a replacement hose.

A

Cleaning the mesh filter in the water supply hose(s)
1. Close the tap and loosen the inlet hose on the tap. 2. Clean the internal mesh filter and screw the water inlet hose back onto the tap. 3. Now unscrew the inlet hose on the rear of the washing machine. 4. Pull off the mesh filter from the washing machine connection with universal pliers and clean it. 5. Refit the mesh filter and screw the inlet hose on again. 6. Turn on the tap and ensure that the connections are completely water-tight.

B

Safety valve inspection window

C

GB 9

Black process 45.0° 100.0 LPI