FUNAI WF-13C2
Manual de Servicio

1

Select �CHANNEL SET UP�
�MENU� TIMER PROGRAMMING PICTURE CONTROL SETTING CLOCK B CHANNEL SET UP USER�S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN TIME SEARCH

2

Select �ENGLISH� or �ESPA�OL�

Press the MENU button on the remote control. Press the PLAY/K or STOP/L button to point to �CHANNEL SET UP�. Then, press the F.FWD/B button.

Select �ENGLISH� or �ESPA�OL�= Spanish using the F.FWD/B or REW/s button.

3

Exit the Language mode

Press the MENU button on the remote control to return to TV mode. NOTE: If for some reason the menu is in Spanish, press the MENU button on the remote control, press the PLAY/K button to point to �IDIOMA [ESPA�OL]�, then press the F.FWD/B button, then press the MENU button on the remote control.

2

Select �ADD/DELETE CH�

� CHANNEL SET UP � B ADD / DELETE CH (TV) AUTO PRESET

Press the PLAY/K or STOP/L button to point to �ADD/DELETE CH�. Press the F.FWD/B button.

3

Enter the desired channel number

DAYLIGHT-SAVING TIME
Select this feature and the TV/VCR�s clock automatically will advance one hour in April, then reverse one hour in October. When Daylight-Saving Time is ON, the clock will change automatically as follows: � First Sunday of April : At 2 AM the clock immediately changes to 3 AM. Any timer programming you have set to occur between 2 AM and 3 AM will not record. � Last Sunday of October : At 2 AM the clock immediately changes to 1 AM. Make sure ... � Press the POWER button to turn on the TV/VCR.

Press the PLAY/K or STOP/L button until your desired channel number appears. (You can also use the number buttons or the CHANNEL K/L button to enter it.) (Example: CH8)

08
ADD / DELETE

4

Delete (or add) it from (into) memory

Press the F.FWD/B or REW/s button. The channel number changes to light red. The channel is deleted from memory. � To delete another channel, repeat steps [3] and [4]. � If you press the F.FWD/B or REW/s button again, the channel is memorized again. Added channel: Light blue. Deleted channel: Light red.

5

Exit the channel setup mode

Press the MENU button on the remote control to returns to TV mode. NOTE: To confirm that channel(s) has been deleted or added, press the CHANNEL K or L button.

Press the MENU button on the remote control. Press the PLAY/K or STOP/L button to point to �SETTING CLOCK�. Then, press the F.FWD/B button.

1

Select �SETTING CLOCK�

TIMER PROGRAMMING PICTURE CONTROL B SETTING CLOCK CHANNEL SET UP USER�S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN TIME SEARCH

�MENU�

2

Set �D.S.T.� (Daylight-Saving Time) to [ON]
� SETTING CLOCK � AUTO CLOCK AUTO CLOCK CH MANUAL CLOCK SET B D.S.T. [ON] [ON] [AUTO]

SELECTING THE LANGUAGE
Make sure ... � Press the POWER button to turn on the TV/VCR. NOTE: This function effects only the language on the screen menu and not the audio source.

Press the PLAY/K or STOP/L button to point to �D.S.T.�. Then, press the F.FWD/B or REW/s button until [ON] appears.

3

Exit the Daylight-Saving Time mode

1

Select �LANGUAGE�

�MENU� TIMER PROGRAMMING PICTURE CONTROL SETTING CLOCK CHANNEL SET UP USER�S SET UP V-CHIP SET UP B LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN TIME SEARCH

Press the MENU button on the remote control to return to TV mode.

Press the MENU button on the remote control. Press the PLAY/K or STOP/L button to point to �LANGUAGE�.

TO CANCEL THE DAYLIGHT-SAVING TIME
Repeat steps [1] to [2], select [OFF] using the F.FWD/B or REW/s button.Then, press the MENU button on the remote control to return to TV mode. - 13 EN
9I03