42022aGB.fm5 Page 1 Sunday, January 2, 2000 4:55 PM
PRODUCT SHEET
1. Lid handle. 2. Lock. 3. Seal. 4. Divider. 5. Defrost water drain plug. 6. Control panel. 7. Motor compartment ventilation grille. 8. Upper edge.
GB
Controls
1. Thermostat: Temperature adjustment. 2. Red LED: Indicates that the freezer temperature is not sufficiently low. 3. Green LED: Illuminates when the appliance is on. 4. Orange illuminated button: Fast freeze function ON/OFF. The fast freeze function is active when the orange LED in the button is lit.
1
1
2
3
1
2
3
4
The exact configuration of the controls may vary according to the model. Notes: For correct operation of the appliance and to allow the lid to open freely without damage, leave at least 7 cm clearance at the sides and rear. After installation, wait for at least two hours without moving the appliance before connecting it to the power supply; this will enable the refrigerant circuit to reach optimum efficiency. If the freezer is left empty for short periods, it is preferable not to switch it off. Frost formation on the upper edges and interior walls of the appliance is a natural phenomenon and will not affect the performance of the freezer.
