BAUKNECHT WAL 9990
Manual de Usuario

4GB05182.FM Page 2 Friday, June 25, 2004 5:17 PM

CONSUMPTION DATA *
Programme Temperature Size of wash (°C) Cotton Cotton Cotton Easy Care Easy Care Daily Load Delicates Wool Rapid Plus Handwash 95 60 40 60 40 40 30 40 30 30 (kg) 6.0 6.0 5.0 2.5 2.5 3.0 1.5 1.0 3.0 1.0 Water (l) 54*** 49 47 55*** 50 48 60 60 37 45 Energy (kWh) 1.90 1.14 0.70 0.70 0.50 0.55 0.50 0.50 0.40 0.40 Programme duration ** approx. (hours : minutes) 1:55 2:20 2:00 1:30 1:15 1:00 0:45 0:40 0:30 0:35

�Eco�
� The duration of the wash is extended and the temperature reduced. This saves you up to 30% energy and still maintains good washing results.

PROGRAMME START
After you have selected the programme and any additional options, the indicator light above the �Start/Pause� button blinks. Turn on the tap and start the programme by pressing the �Start/Pause� button. The indicator light above the button will now illuminate. The stage of the wash programme appears in the LCD, as well as the time remaining until the end of the wash programme.

�Easy Iron�
� To lessen creasing, the water quantity is increased and the clothes are spun very gently at reduced power. This makes your laundry significantly damper at the end of the programme.

STORE INDIVIDUAL PROGRAMME (�Memory�)
� Turn the programme selector to �Memory�. � Select one of the 10 storage spaces using the � � � button and confirm with �OK�. � or

DOOR LOCK
Within the first 15 minutes after the start of the �Cotton� and �Easy Care� programmes the door can be opened to add further laundry. �You can add an item� will appear in the LCD as long as this option exists. This is not possible if �Rapid Plus� is selected.

� A list of all the available wash programmes appears in the LCD. Select the desired programme with � � and � � and confirm with �OK�. � You can then, as already described, select available additional options for the wash programme and set temperature and spin speed as desired. � When all the settings have been made and confirmed with �OK�, the programme is stored in the selected storage space and can be reselected at any time and run using �Start/Pause�.

* Consumption values were measured in normal conditions in compliance with Standard IEC/EN 60456. ** The programme duration may vary from the chart values. The washing machine will allow for individual household conditions and adapt the programme run time accordingly. *** To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.

PROGRAMME END
� The time remaining on the LCD shows 0:00, and displays �END OF CYCLE�. 1. Turn the programme selector with the marking to the top. 2. Close the water tap. 3. Open the door and unload the machine.

POUR IN DETERGENT, CLOSE THE DOOR AND SELECT A PROGRAMME
Add the detergent as described in the chapter �Detergent and Additives� in the booklet. 1. Turn the programme selector knob in any direction to the desired programme. This appears in the LCD display, together with spin speed, wash temperature and wash programme duration (in hours and minutes). The indicator light above the �Start/Pause� button will blink. 2. Temperature and spin speed can be changed using the � � button as well as the � � and � � buttons. 3. The additional options available for the wash programme can be selected with the � � button.

�Prewash�
� Only for heavily soiled laundry (for example sand or granular dirt). Programme duration is increased by some 15 min.

RESELECT AFTER PROGRAMME START
A newly-selected programme will continue in the same programme section during which the current programme was interrupted. Therefore do not add any more detergent. 1. Press the �Start/Pause� button to interrupt the programme. The indicator light flashes. 2. Select the new programme (with temperature), any additional options and - if you wish - another spin speed. In this way you can also select an additional option later, without changing the current programme. 3. Press the �Start/Pause� button again to re-start the programme. � If you are in the �Prewash� programme step this additional option can not be deselected as described (to do this see �Cancel/Delete programme�)

�Intensive rinse�
� An additional rinse cycle is carried out. � This additional option is particularly suitable for areas with very soft water, for washing baby linen and helping people with detergent allergies.

START DELAY
The �Start Delay� allows you to run the machine at your convenience, for example at night when electricity is cheaper. � Press the �Start Delay� button. Using the � � and � � keys, you can set the time on the display to when you want the wash programme to start, then confirm this with �OK�. � Press the �Start/Pause� button. �Start at ...� appears in the LCD display until the preset start time is reached. The wash programme then starts automatically. � During the programme, the remaining time appears in the LCD.

�Rinse hold�
� The laundry remains in the last rinse water without being spun: discoloration of the laundry and additional creasing are prevented. � This option is particularly recommended for the programme �Easy Care� or �Delicates�. � This additional function is particularly useful if you want to postpone spinning to a later time. Note: The programme has reached �Rinse hold� when the corresponding symbol blinks in the LCD.

PRESS THE DESIRED SPECIAL OPTION BUTTON �Spin Speed�
� A maximum spin speed is assigned to each programme. � Press the � � button until �To set Spin Speed� appears in the LCD display. The set spin speed blinks and can be changed with the � � and � � buttons. � If the spin speed �0� is selected, the final spin is cancelled. The water is drained out only.

�Start Delay� correction.
� If you have already confirmed the desired start time with �OK� or have already pressed �Start/Pause�, they can still be changed. To do this, press the �Start Delay� button again. The set time blinks and can be changed with the � � and � � buttons. Then you only need to confirm the changed time with �OK� again.

Terminate the �Rinse Hold� option:
� Press the �Start/Pause� button; the programme will terminate automatically with the appropriate spin cycle for the current programme. � If you do not wish to spin the clothes, turn the programme selector knob to �Drain� and press the �Start/Pause� button.

CANCEL/DELETE PROGRAMME
1. Press the �Start/Pause� button to interrupt the programme. The indicator light flashes. 2. Press the �Reset� button. �Do you want reset ?� appears in the LCD. 3. Confirm with the �OK� button to start draining the water.

5019 401 05182
Black process 45.0° 150.0 LPI