|
Usuarios conectados
Actualmente hay 5869 visitantes online.
|
Productos
|
Información
|
Destacado
|
|
|
|
|
No hay comentarios de productos.
2-12
ADDITIONAL INFORMATION
Table of Brand Codes
Before Calling Service Personnel
No power. Toshiba 01 Proton 11 Noise is present in the Hi-Fi sound being
� Plug power cord into the outlet firmly.
Reference Information
name of your TV Check the following symptoms before requesting servicing. Brand Code
Bell & Howell 09 Pulser 14 � The power cord is not plugged in. played.
Carver 10 Quasar 07, 15 � Tracking is not set appropriately.
Celebrity 03 Radio Shack 13 Although power is on, the VCR will � Adjust the tracking manually. (page 19)
Citizen 12 RCA 02 The timer recording function does not � There is no cassette. work. � Load a cassette. (page 18) Curtis Mathes 12 Realistic 09, 11, 13
not work.
Dumont Runco (NEC) 14 � There is an error in programming.
Electro band 03 Samsung 11, 12 � There has been a power failure. � There is no cassette in the VCR. � Reset the clock. (page 15) � Load a cassette with the safety tab attached. Emerson 09, 11 Sanyo 09
The clock does not work. � Reset the timer recording program. (page 27)
Fisher 09 Scotch 11 (page 18)
GE 02, 07, Scott 11 � The cassette does not have the safety tab. � The time is incorrect. � Set the clock correctly. (page 15)
The timer does not work properly.
Gibralter 14 Sears 01, 02, 09, 10, 11 � Use another cassette with a safety tab or
Goldstar 11 Sharp 08, 13 cover the hole with adhesive tape. (page 18)
Hallmark 11 Sony 03 � The timer indicator is not displayed. � The channel or video input mode is not � Set TV to the video channel (3 or � Reset the clock. (page 15) JBL Sylvania 10 4) or set video input mode on the TV. The remote control does not work (page 11) � The TV signal is weak. � The batteries are exhausted. � Replace all batteries. (page 10)
The picture does not appear on the TV screen.
� Press both TIMER simultaneously. (page 26) Hitachi 06 Soundesign 11
Infinity 10 Supreme 03 � There has been a power failure. set correctly.
JCB 03 Tandy 08
ADDITIONAL INFORMATION
properly. JVC 05 Technics 07, 15
LXI 01, 02, 09, 10, 11 Techwood 07 � Adjust the antenna direction or use an
Magnavox 10 Teknika 04, 10, 12 optional antenna booster. � Plug power cord into the outlet firmly. Megatron 06, 11 Victor 05 � Make sure the remote control is within 30° of
Marantz 10 TMK 11 � The power cord is not plugged in. operating range.
� The remote control is operated beyond the
Memorex 04, 09, 11 Vidikron 10 The picture does not appear on the TV remote sensor on the VCR. (page 10)
screen during recording and playback. � Too far from the VCR. MGA 04, Vidtech 11
� The video channel or VCR mode is not set � Use remote control within 7 m from the Midland 02, 07, 14 Wards 10, 11, 13 � Press TV/VCR to select the VCR mode and � An obstacle may be in way of the operation. � Remove the obstacle. � The operating mode of the remote control is not � Press VCR or TV depending on the Nikko 11 � Use cassette with a safety tab or cover the hole with adhesive tape. (page 18) equipment you want to operate. (pages 14, 29) Optimus 09 front of the VCR. (page 10) correctly.
Mitsubishi 04, 11 Zenith 14
Motorola 08 set the TV channel to 3 or 4. (pages 11, 24)
MTC 12 The VCR does not record.
NAD 01, 11 � The loaded cassette has no safety tab. set correctly.
Optonica 08 playback picture poor. The cassette is ejected immediately after � Adjust the tracking manually. (page 19) � The cassette was inserted with the label side Penney 01, 02, 07, 11, 12 � Clean the video heads with a commercially Philips 10
Panasonic 07, 10, 15 � Tracking is not set appropriately.
it is loaded.
not paralleling the compartment. available cleaning tape. The does not go into the cassette
Philco 10 � The video heads are dirty. � Reload it carefully. (page 18)
Pioneer 16 compartment.
Princeclub 12 � There is already a cassette in the VCR.
The desired sound is not heard, such as SAP, stereo, or regular sound.
� Setting of sounds is not correct. (page 18) (page 28)
Prism 07 � Eject cassette and reload the new one.
Proscan 02 � Select a desired sound using A.SELECT.
30 31
Toshiba
|
|
|
> |
|