TOSHIBA W602
Manual de Servicio

5. Alignment and Adjustment
5-1 Reference
1) X-Point (Tracking center) adjustment, �Head switching adjustment� and �NVRAM option setting� can be adjusted with remote control. 2) When replacing the micom (IC601) be sure to adjust the �Head switching adjustment� and �NVRAM option setting�. 3) When replacing the cylinder ass�y, be sure to adjust the �X-Point� and �Head switching adjustment�. 4) Remote control used for same chassis as a accessory is available for all adjustments. 5) How to adjustment. - Intermittently short-circuit the test point on Main PCB with pincets to set the adjustment mode. - If the corresponding adjustment button is pressed, the adjustment is preformed automatically. - If the adjustment is completed, be sure to turn the power off.

5-1-1 Location of adjustment button of remote control

VCR

TV

POWER

1

2 5 8 0

3
CH/TRK

X-Point (Tracking Center) Adjustment

4 7
I.SELECT

6 9
TV VOL

100
COUNT RESET TV/VCR

DISPLAY

REMAIN/ COUNTER

SP/SLP

REC

TIMER

Head Switching Adjustment
PLAY

REW

CURSOR

FF

SLOW

STOP

PAUSE/STILL

PROG.

CANCEL

ENTER

NVRAM Option Setting
A.SELECT EJECT

VC-602

Fig. 5-1 Toshiba 5-1