HARMAN VX400
Manual del propietario

Creating Presets
Master Level - The Number 5 Knob controls the Vx400�s Master Level.

Phaser
A Phaser splits the incoming signal, and then changes the phasing of the signal. This signal is then taken in and out of phase and mixed back in with the original signal. As the phasing changes, different frequencies get canceled resulting in a warm sort of twisting sound. Parameter 1 - The Number 2 Knob adjusts the rate (Speed) of the modulating phase. Ranges from 1 to 99. Parameter 2 - The Number 3 Knob adjusts the intensity (Depth) of the modulating phase. Ranges from 1 to 99. FX Level - The Number 4 Knob controls the volume of the Phaser. Ranges from 0 (all dry) to 99. Master Level - The Number 5 Knob controls the Vx400�s Master Level.

Tremolo
A Tremolo effect modulates the volume of the signal at an even rate. Parameter 1 - The Number 2 Knob adjusts the rate (Speed) the volume modulates. Ranges from 1 to 99. Parameter 2 - The Number 3 Knob adjusts the intensity (Depth) of the modulating volume. Ranges from 0 (all dry) to 99. The Number 4 Knob has no function when the Tremolo effect is selected. Master Level - The Number 5 Knob controls the Vx400�s Master Level.

Vibrato
A Vibrato effect modulates the pitch of the incoming signal at an even rate. Parameter 1 - The Number 2 Knob adjusts the rate (Speed) at which the pitch modulates. Ranges from 1 to 99. Parameter 2 - The Number 3 Knob adjusts the intensity (Depth) of the modulating pitch. Ranges from 1 to 99. The Number 4 Knob has no function when the Vibrato effect is selected. Master Level - The Number 5 Knob controls the Vx400�s Master Level.

Strobe
The Strobe is a tremolo effect that uses a square wave LFO for the modulation of the signal. Parameter 1 - The Number 2 Knob to adjust the rate (Speed) at which the LFO modulates. Ranges from 1 to 99. Parameter 2 - The Number 3 Knob controls the intensity (Depth) of the Effect. Ranges from 0 to 99. The Number 4 Knob has no function when the Strobe effect is selected. Master Level - The Number 5 Knob controls the Vx400�s Master Level.

Doubler
The Doubler effect adds a slightly delayed signal to the input signal creating a thicker sound as the level is increased. FX Level - The Number 4 Knob controls the volume of the doubled signal. Ranges from 0 (all dry) to 99 (all wet). The Number 2, and 3 Knobs have no function when the Doubler effect is selected. 13